The following is the full spec file for a default.yml that controls how Khulnasoft gets provisioned.
ansible_post_tasks: <list>
* list of paths or URLs to custom Ansible playbooks to run AFTER Khulnasoft has been setup using the provided site.yml
* Default: []
ansible_pre_tasks: <list>
* list of paths or URLs to custom Ansible playbooks to run BEFORE Khulnasoft sets up using the provided site.yml
* Default: []
ansible_environment: <dict>
* Map of environment variables used only during the execution context of all the Ansible tasks. For more information, see https://docs.ansible.com/ansible/latest/user_guide/playbooks_environment.html
* Default: {}
hide_password: <bool>
* Boolean that determines whether or not to output Khulnasoft admin passwords through Ansible
* Default: false
retry_num: <int>
* Number of retries to make for potentially flakey/error-prone tasks
* Default: 60
wait_for_khulnasoft_retry_num: <int>
* Number of retries to make when waiting for a Khulnasoft instance to be available
* Default: 60
shc_sync_retry_num: <int>
* Number of retries to make when waiting for sync up with a search head cluster
* Default: 60
retry_delay: <int>
* Duration of waits between each of the aforementioned retries (in seconds)
* Default: 6
restart_retry_delay: <int>
* Duration of waits between retries to issue restart command for khulnasoftd (in seconds)
* Default: 30
khulnasoft_home_ownership_enforcement: true
* Boolean that to control and enable UAC on $KHULNASOFT_HOME (recommended to be enabled)
* Default: true
config:
baked: <str>
* Configuration filename
* Default: default.yml
defaults_dir: <str - filepath>
* Location on filesystem where the default.yml can be found
* Default: /tmp/defaults
env:
headers: <str>
* Define header information (in necessary) when pulling default.yml from a URL
* Default: null
var: <str>
* Control environment variable name that determines location of default.yml
* Default: KHULNASOFT_DEFAULTS_URL
verify: <bool>
* Enable/disable SSL validation
* Default: true
host:
headers: <str>
* Define header information (in necessary) when pulling default.yml from a URL
* Default: null
url: <str>
* Define URL to pull default.yml from
* Default: null
verify: <bool>
* Enable/disable SSL validation
* Default: true
max_delay: <int>
* Maximum duration (in seconds) between attempts to pull the default.yml from a remote source
* Default: 60
max_retries: <int>
* Maximum attempts to pull the default.yml from a remote source
* Default: 3
max_timeout: <int>
* Maximum timeout for attempts to pull the default.yml from a remote source
* Default: 1200
khulnasoftbase_username: <str>
* Used for authentication when downloading apps from https://khulnasoftbase.khulnasoft.com/ (this is NOT required to even be specified, unless you have KhulnasoftBase apps defined in your khulnasoft.apps_location)
* NOTE: Use this in combination with khulnasoftbase_password. You will also need to run Ansible using the dynamic inventory script (environ.py) for this to register and work properly.
* Default: null
khulnasoftbase_password: <str>
* Used for authentication when downloading apps from https://khulnasoftbase.khulnasoft.com/ (this is NOT required to even be specified, unless you have KhulnasoftBase apps defined in your khulnasoft.apps_location)
* NOTE: Use this in combination with khulnasoftbase_username. You will also need to run Ansible using the dynamic inventory script (environ.py) for this to register and work properly.
* Default: null
khulnasoftbase_token: <str>
* Used for authentication when downloading apps from https://khulnasoftbase.khulnasoft.com/ (this is NOT required to even be specified, unless you have KhulnasoftBase apps defined in your khulnasoft.apps_location)
* NOTE: This is ordinarily generated using the dynamic inventory script (environ.py) using the aforementioned `khulnasoftbase_username` and `khulnasoftbase_password` variables above, and every token has an expiry.
* Default: null
cert_prefix: <str>
* Specify the scheme used for the KhulnasoftD management endpoint (typically port 8089). If you plan on running KhulnasoftD over HTTP, you should set this to "http" so the Ansible plays are aware of the intended scheme.
* Default: https
java_download_url: <str>
* Java JDK URL that is dynamically fetched and installed at container run-time. For example: "https://download.java.net/java/GA/jdk11/9/GPL/openjdk-11.0.2_linux-x64_bin.tar.gz"
* Default: null
java_update_version: <str>
* Name of the Java JDK file used for installation. For example: "openjdk-11.0.2_linux-x64_bin.tar.gz"
* Default: null
java_version: <str>
* String notifying the Ansible plays which version of Java is being installed so variables can be parsed properly. For example: "openjdk:11"
* Default: null
dmc_forwarder_monitoring: <bool>
* Feature-flag to enable forwarder asset monitoring through the Distributed Management Console (DMC). This is disabled by default.
* Default: false
dmc_asset_interval: <str>
* Cron-formatted string of the frequency and recurrence of the query that builds the forwarding assets table
* Default: "3,18,33,48 * * * *"
docker: <bool>
* DEPRECATED - this was used to signal whether or not the instance being provisioned was running in Docker. This does not affect playbook execution at all, but the dynamic inventory script environ.py will set this to setup host::vars mapping as needed.
khulnasoft:
role: <str>
* Role to assume when setting up Khulnasoft. Accepted values include: khulnasoft_standalone, khulnasoft_search_head, khulnasoft_search_head_captain, khulnasoft_indexer, khulnasoft_deployer, khulnasoft_cluster_master, khulnasoft_deployment_server, khulnasoft_heavy_forwarder, khulnasoft_license_master, khulnasoft_universal_forwarder, and khulnasoft_monitor.
* Default: khulnasoft_standalone
allow_upgrade:
* Determines whether or not to perform an upgrade (to the khulnasoft.build_location)
* Default: true
build_location: <str>
* Khulnasoft build location, either on the filesystem or a remote URL
* Default: null
build_url_bearer_token: <str>
* Bearer token used to provide authorization when fetching a Khulnasoft build from a remote URL.
* Default: null
license_master_url: <str>
* Hostname of Khulnasoft Enterprise license master instance. May be overridden using KHULNASOFT_LICENSE_MASTER_URL environment variable.
* Default: null
cluster_master_url: <str>
* Hostname of Khulnasoft Enterprise cluster master instance. May be overridden using KHULNASOFT_CLUSTER_MASTER_URL environment variable.
* Default: null
auxiliary_cluster_masters: <list>
* Array of other cluster masters to support multi-cluster distributed search. The node must be a search head configured to peer an initial cluster master before the masters listed here are added. For more information, see https://docs.khulnasoft.com/Documentation/Khulnasoft/latest/Indexer/Configuremulti-clustersearch.
* Default: []
* Example:
* auxiliary_cluster_masters:
* - url: https://master.us-west.corp.net:8089
* pass4SymmKey: thisisasecret
* - url: https://master.us-east.corp.net:8089
* pass4SymmKey: thisisanothersecret
deployer_url: null
* Hostname of Khulnasoft Enterprise deployer instance. May be overridden using KHULNASOFT_DEPLOYER_URL environment variable.
* Default: null
deployment_client: <dict>
* Deployment client object that configures `deployment-client` stanza of `deploymentclient.conf` file.
* Default: null
name: null
* Client name for deployment client. May be overridden using KHULNASOFT_DEPLOYMENT_CLIENT_NAME environment variable.
* Default: null
search_head_captain_url: null
* Hostname of Khulnasoft Enterprise search head cluster captain instance. May be overridden using KHULNASOFT_SEARCH_HEAD_CAPTAIN_URL environment variable.
* Default: null
search_head_cluster_url: null
* URL of the Khulnasoft search head cluster
* NOTE: This is being deprecated in favor of `khulnasoft.search_head_captain_url`.
* Default: null
disable_popups: <bool>
* When set to true, pop-ups/modals will be disabled from login on the homescreen and search app.
* Default: false
preferred_captaincy: <bool>
* Boolean to determine whether khulnasoft should set a preferred captain. This can have an effect on day 2 operations if the search heads need to be restarted
* Default: true
apps_location: <list>
* List of apps to install - elements can be in the form of a URL or a location in the filessytem
* Default: null
license_uri: <str>
* Path or remote URL to a valid Khulnasoft license
* Default: null
ignore_license: <bool>
* Allow proceeding with a bad/invalid Khulnasoft license
* Default: false
license_download_dest: <str - filepath>
* Path in filesystem where licenses will be downloaded as
* Default: /tmp/khulnasoft.lic
wildcard_license: <bool>
* Enable licenses to be interpreted as fileglobs, to support provisioning with multiple Khulnasoft licenses
* Default: false
admin_user: <str>
* Default admin-level user to run provisioning commands under. It is only possible to change the admin user name at the first-time execution of Khulnasoft Enterprise.
* Default: admin
password: <str>
* Default Khulnasoft admin user password. This is REQUIRED when starting Khulnasoft, and can only be set during the first-time run of the playbooks. If changes are required to the admin password, they should be done through KhulnasoftWeb/CLI and the new value should be re-entered here.
* Default: null
declarative_admin_password: <bool>
* When set to true, the playbooks will always enforce that the admin password is set to the value of `password` above. Any changes to the admin password outside of khulnasoft-ansible will be reverted.
* Default: false
user: <str>
* Host user under which Khulnasoft will run
* Default: khulnasoft
group: <str>
* Host group under which Khulnasoft will run
* Default: khulnasoft
enable_service: <bool>
* Determine whether or not to enable Khulnasoft for boot-start (start via sysinitv or systemd, etc.)
* Default: false
service_name: <str>
* Specify the service name of khulnasoftd when running through sysinitv, systemd, etc.
* Default: null
opt: <str - filepath>
* Path in filesystem where Khulnasoft will be installed
* Default: /opt
home: <str - filepath>
* Path in filesystem where KHULNASOFT_HOME is located
* Default: /opt/khulnasoft
exec: <str - filepath>
* Path in filesystem where khulnasoft binary exists (this will depend on khulnasoft.home)
* Default: /opt/khulnasoft/bin/khulnasoft
pid: <str - filepath>
* Path in filesystem of khulnasoft PID file (this will depend on khulnasoft.home)
* Default: /opt/khulnasoft/var/run/khulnasoft/khulnasoftd.pid
app_paths:
default: <str - filepath>
* Path in filesystem of default apps (this will depend on khulnasoft.home)
* Default: /opt/khulnasoft/etc/apps
deployment: <str - filepath>
* Path in filesystem of deployment apps (this will depend on khulnasoft.home)
* Default: /opt/khulnasoft/etc/deployment-apps
httpinput: <str - filepath>
* Path in filesystem of the HTTP input apps (this will depend on khulnasoft.home)
* Default: /opt/khulnasoft/etc/apps/khulnasoft_httpinput
idxc: <str - filepath>
* Path in filesystem of indexer cluster master apps (this will depend on khulnasoft.home)
* Default: /opt/khulnasoft/etc/master-apps
shc: <str - filepath>
* Path in filesystem of search head cluster apps (this will depend on khulnasoft.home)
* Default: /opt/khulnasoft/etc/shcluster/apps
app_paths_install:
default: <list>
* List of apps to install into app_paths.default - elements can be in the form of a URL or a location in the filessytem
* Default: null
deployment: <list>
* List of apps to install into app_paths.deployment - elements can be in the form of a URL or a location in the filessytem
* Default: null
idxc: <list>
* List of apps to install into app_paths.idxc on the CM to be pushed to the Indexer Cluster - elements can be in the form of a URL or a location in the filessytem
* Default: null
shc: <list>
* List of apps to install into app_paths.shc on the deployer to be pushed to the Search Head Cluster- elements can be in the form of a URL or a location in the filessytem
* Default: null
hec:
enable: <bool>
* Determine whether or not to disable setting up the HTTP event collector (HEC)
* Default: True
ssl: <bool>
* Determine whether or not to enable SSL on the HTTP event collector (HEC) endpoint
* Default: True
port <int>
* Determine the port used for the HTTP event collector (HEC) endpoint
* Default: 8088
token: <str>
* Determine a token to use for the HTTP event collector (HEC) endpoint
* Default: null
cert: <str>
* Filepath to a custom SSL certificate for HEC
* Default: null
password: <str>
* SSL password used to create the SSL certificate for HEC
* Default: null
http_enableSSL: <int|bool>
* Determine whether or not to enable SSL on KhulnasoftWeb
* Default: 0
http_enableSSL_cert: <str>
* Path in filesystem to KhulnasoftWeb SSL certificate
* Default: null
http_enableSSL_privKey: <str>
* Path in filesystem to KhulnasoftWeb SSL private key
* Default: null
http_enableSSL_privKey_password: <str>
* Password used to setup KhulnasoftWeb SSL private key
* Default: null
http_port: <int>
* Determine the port used for KhulnasoftWeb
* Default: 8000
root_endpoint: <str>
* Root endpoint used when serving KhulnasoftWeb over a different path
* Default: null
s2s:
enable: <bool>
* Determine whether or not to enable Khulnasoft-to-Khulnasoft communication. This is REQUIRED for any distributed topologies.
* Default: true
port: <int>
* Determine the port used for the Khulnasoft-to-Khulnasoft networking
* Default: 9997
ssl: <bool>
* When true, enables khulnasofttcp input to use SSL
* Default: false
cert: <str>
* Coupled with the ssl parameter above, specify the path to the SSL certificate used for khulnasofttcp-ssl
* Default: null
password: <str>
* Coupled with the ssl parameter above, specify the SSL password used for khulnasofttcp-ssl
* Default: null
ca: <str>
* Coupled with the ssl parameter above, specify the path to the CA certificate used for khulnasofttcp-ssl
* Default: null
svc_port: <int>
* Determine the port used for Khulnasoft management/remote API calls
* Default: 8089
appserver:
port: <int>
* Determine the port used for Khulnasoft Application Server
* Default: 8065
kvstore:
port: <int>
* Determine the port used for Khulnasoft Key-Value store
* Default: 8191
launch: null
* key::value pairs for environment variables that get written to ${KHULNASOFT_HOME}/etc/khulnasoft-launch.conf
* Default: null
asan: <bool>
* Feature-flag to enable special configurations when using debug, address-sanitized builds. This is not used externally and not recommended to change.
* Default: false
connection_timeout: <int>
* Change timeout value (in seconds) for the setting `khulnasoftdConnectionTimeout` in web.conf. This triggers a change only when the value is non-zero.
* Default: 0
secret: <str>
* Secret passcode used to encrypt all of Khulnasoft's sensitive information on disk. When not set, Khulnasoft will autogenerate a unique secret local to each installation. This is NOT required for any standalone or distributed Khulnasoft topology
* NOTE: This may be set once at the start of provisioning any deployment. Any changes made to this khulnasoft.secret after the deployment has been created must be resolved manually, otherwise there is a severe risk of bricking the capabilities of your Khulnasoft environment.
* Default: null
pass4SymmKey: <str>
* Password for Symmetric Key used to encrypt Khulnasoft's sensitive information on disk. When not set, Khulnasoft will encrypt a default value (`changeme`) with `khulnasoft.secret` and set it as `pass4SymmKey` in the `[general]` stanza of `/opt/khulnasoft/etc/system/local/server.conf`.
* Default: null
ssl:
* Configure the default certificates used by Khulnasoft Enterprise
enable: <bool>
* Enable SSL on the Khulnasoftd management API (typically port 8089)
* Default: True
cert: <str>
* Specify the path to the SSL certificate used for the Khulnasoftd management API
* Default: null
password <str>
* Specify the path to the SSL password used by the certificate above
* Default: null
ca: <str>
* Specify the path to the CA certificate used for the Khulnasoftd management API
* Default: null
idxc:
label: <str>
* Provide a label for indexer clustering configuration
* Default: idxc_label
replication_factor: <int>
* Determine knowledge object replication factor
* Default: 3
replication_port: <int>
* Determine the port used for replication of artifacts
* Default: 9887
search_factor: <int>
* Determine the search factor used by indexer clustering
* Default: 3
secret: <str>
* Determine the secret used to configure indexer clustering. This is pass4SymmKey in the `[clustering]` stanza of server.conf.
* NOTE: This is being deprecated in favor of `khulnasoft.idxc.pass4SymmKey`.
* Default: null
pass4SymmKey: <str>
* Determine the secret used to configure indexer clustering. This is REQUIRED when setting up indexer clustering. This is pass4SymmKey in the `[clustering]` stanza of server.conf.
* Default: null
discoveryPass4SymmKey: <str>
* Determine the secret used to enable indexer discovery (for any forwarding clients connecting to the cluster master). This is pass4SymmKey in the `[indexer_discovery]` stanza of server.conf.
* Default: null
multisite_master:
* Specify the location of the multisite cluster
* Default: null
multisite_master_port:
* Specify the management port of the multisite cluster master
* Default: 8089
multisite_replication_factor_origin:
* Determine origin-level knowledge object replication factor when in a multisite environment
* Default: 2
multisite_replication_factor_total:
* Determine site-level knowledge object replication factor when in a multisite environment
* Default: 3
multisite_search_factor_origin:
* Determine origin-level search replication factor when in a multisite environment
* Default: 1
multisite_search_factor_total:
* Determine site-level search replication factor when in a multisite environment
* Default: 3
site:
* Define the site of this particular Khulnasoft Enterprise instance when in a multisite environment
* Default: null
all_sites:
* Define all sites of the topology when in a multisite environment
* Default: null
set_search_peers: <bool>
* Feature-flag to disable the automatic peering from the search tier to the indexer tier (cluster master or indexers directly). It is discouraged to change this to false, but it is exposed for the purposes of testing and isolating the groups.
* Default: true
shc:
label: <str>
* Provide a label for search head clustering configuration
* Default: shc_label
replication_factor: <int>
* Determine knowledge object replication factor
* Default: 3
replication_port: <int>
* Determine the port used for replication of artifacts
* Default: 9887
secret: <str>
* Determine the secret used to configure search head clustering. This is pass4SymmKey in server.conf.
* NOTE: This is being deprecated in favor of `khulnasoft.shc.pass4SymmKey`
* Default: null
pass4SymmKey: <str>
* Determine the secret used to configure search head clustering. This is REQUIRED when setting up search head clustering. This is pass4SymmKey in the `[shclustering]` stanza of server.conf.
* Default: null
deployer_push_mode: <str>
* Change the strategy used by the deployer when bundling apps and distributing them across the search head cluster. The acceptable modes are: full, local_only, default_only, and merge_to_default (merge_to_default is the default unless otherwise specified).
* For more information, please see: https://docs.khulnasoft.com/Documentation/Khulnasoft/latest/DistSearch/PropagateSHCconfigurationchanges#Set_the_deployer_push_mode
* Default: null
dfs:
enable: <bool>
* Enable Data Fabric Search (DFS)
* Default: false
port: <int>
* Identifies the port on which the DFSMaster Java process runs.
* Default: 9000
dfc_num_slots: <int>
* Maximum number of concurrent DFS searches that run on each search head
* Default: 4
dfw_num_slots: <int>
* Maximum number of concurrent DFS searches that run on a search head cluster
* Default: 10
dfw_num_slots_enabled: <bool>
* Enables you to set the value of the field dfw_num_slots.
* Default: false
spark_master_host: <str>
* This setting identifies the Spark master.
* Default: 127.0.0.1
spark_master_webui_port: <int>
* Identifies the port for the Spark master web UI.
* Default: 8080
dsp:
enable: <bool>
* Enable Data Stream Procesor forwarding (DSP)
* Default: false
server: <str>
* DSP forwarding service endpoint
* Default: forwarders.scp.khulnasoft.com:9997
cert: <str>
* Filepath to DSP forwarding client certificate - if set to 'auto', a new cert will be generated
* Default: null
verify: <bool>
* Enable server verification when forwarding
* Default: false
pipeline_name: <str>
* When configuring a new/existing DSP pipeline, the name of the pipeline
* Default: null
pipeline_desc: <str>
* When configuring a new/existing DSP pipeline, the description of the pipeline
* Default: null
pipeline_spec: <str>
* When configuring a new/existing DSP pipeline, the specification of the pipeline in SPL2 syntax
* Default: null
smartstore: <dict>
* Nested dict obj to enable automatic SmartStore provisioning
* Default: null
cachemanager: <dict>
* cachemanager server.conf settings related to SmartStore
* Default: null
* Example:
max_cache_size: 500
max_concurrent_uploads: 7
index: <list>
* Per-index SmartStore configuration
* Default: null
* Example:
- indexName: custom_index
remoteName: my_storage
scheme: http
remoteLocation: my_storage.net
s3:
access_key: <access_key>
secret_key: <secret_key>
endpoint: http://s3-us-west-1.amazonaws.com
maxGlobalDataSizeMB: 500
maxGlobalRawDataSizeMB: 200
hotlist_recency_secs: 30
hotlist_bloom_filter_recency_hours: 1
tar_dir: <str>
* Name of directory for the Khulnasoft tar
* Default: khulnasoft
# NOTE: This is the updated schema for this entry - please refer to "Configuration files" section for more info
conf: <list>
- key: <sttr - filename without .conf suffix)
value:
directory: <str - filepath>
* Path in filesystem to create `.conf` file
* Default: /opt/khulnasoft/etc/system/local
content: <dict>
(section name): <dict>
(name) : (value)
* Key-value pairs in configuration file
Using this method of configuration file generation may not create a configuration file the way Khulnasoft expects. Verify the generated configuration file to avoid errors. Use at your own discretion
The default.yml file can be used to specify multiple named configuration files.
conf accepts an array of objects where each entry’s key corresponds to the name of the .conf file and each entry’s value contains a mapping of directory and contents. Files will be created in the directory specified in directory or the default directory (/opt/khulnasoft/etc/system/local) if not provided. content accepts a dictionary where keys are section names and values are key-value pairs to be listed in the configuration file.
The following example generates user-prefs.conf in /opt/khulnasoft/etc/users/admin/user-prefs/local
khulnasoft:
conf:
- key: user-prefs
value:
directory: /opt/khulnasoft/etc/users/admin/user-prefs/local
content:
general:
default_namespace : appboilerplate
search_use_advanced_editor : true
search_line_numbers : false
search_auto_format : false
search_syntax_highlighting : dark
[general]
default_namespace = appboilerplate
search_use_advanced_editor = true
search_line_numbers = false
search_auto_format = false
search_syntax_highlighting = dark
NOTE: The above khulnasoft.conf was changed to accept an array data-type. This array input is only applicable for recent versions of khulnasoft-ansible. If you are using any of the git-tagged versions <= 8.0.2, <= 7.3.5, <= 7.2.9 (which directly map to any of the Docker-based khulnasoft/khulnasoft images), you must use the former dictionary data-type. An example of this is shown below:
khulnasoft:
conf:
user-prefs:
directory: /opt/khulnasoft/etc/users/admin/user-prefs/local
content:
general:
default_namespace : appboilerplate
search_use_advanced_editor : true
search_line_numbers : false
search_auto_format : false
search_syntax_highlighting : dark
Any recent versions of khulnasoft-ansible should still support this map type, however it is strongly recommended you move to the array type for future support.
The following is used in the quickstart section to start Khulnasoft in a standalone mode, using the Khulnasoft installation provided in /tmp/khulnasoft.tgz
---
ansible_post_tasks: null
ansible_pre_tasks: null
hide_password: false
retry_delay: 3
retry_num: 60
wait_for_khulnasoft_retry_num: 60
shc_sync_retry_num: 60
khulnasoft_home_ownership_enforcement: true
config:
baked: default.yml
defaults_dir: /tmp/defaults
env:
headers: null
var: KHULNASOFT_DEFAULTS_URL
verify: true
host:
headers: null
url: null
verify: true
max_delay: 60
max_retries: 3
max_timeout: 1200
khulnasoft:
role: khulnasoft_standalone
upgrade: false
build_location: /tmp/khulnasoft.tgz
apps_location: null
license_uri: null
admin_user: admin
app_paths:
default: /opt/khulnasoft/etc/apps
deployment: /opt/khulnasoft/etc/deployment-apps
httpinput: /opt/khulnasoft/etc/apps/khulnasoft_httpinput
idxc: /opt/khulnasoft/etc/master-apps
shc: /opt/khulnasoft/etc/shcluster/apps
enable_service: false
exec: /opt/khulnasoft/bin/khulnasoft
group: khulnasoft
hec:
enable: True
ssl: True
port: 8088
token: 4a8a737d-5452-426c-a6f7-106dca4e813f
home: /opt/khulnasoft
http_enableSSL: 0
http_enableSSL_cert: null
http_enableSSL_privKey: null
http_enableSSL_privKey_password: null
http_port: 8000
idxc:
enable: false
label: idxc_label
replication_factor: 3
replication_port: 9887
search_factor: 3
secret: dmwHG97SpM+GzeGPUELwr7xXowSAVmLW
ignore_license: false
license_download_dest: /tmp/khulnasoft.lic
opt: /opt
password: helloworld
pid: /opt/khulnasoft/var/run/khulnasoft/khulnasoftd.pid
s2s_enable: true
s2s_port: 9997
search_head_captain_url: null
secret: null
shc:
enable: false
label: shc_label
replication_factor: 3
replication_port: 9887
secret: EpcUlTUHMSOhdjRZb3QqPYf9Lf7L991c
smartstore: null
svc_port: 8089
tar_dir: khulnasoft
user: khulnasoft
wildcard_license: false